INT - FAQ Polti Coffea P10S
When starting up for the first time, or if the coffee machine has not been used for a long time, it is advisable to rinse internal pipes as indicated in the instruction manual.
If your coffee machine has not been used for an extended period of time, we recommend you to rinse the circuits. To do so, check that the filter holder is empty, then press the 2-cup coffee dispensing button three times in a row. In addition, you should perform a descaling cycle, after making approx. 400 cups of coffee. To do so, use a liquid descaler and follow the instructions provided by the manufacturer.
Polti Coffea has a heat up time of about 40 seconds.
To insert the filter holder, place it in its seat and turn it to the right until it locks in position.
With this coffee machine, you can use a wide range of coffee types, from ground coffee for espresso machines to 44 mm E.S.E. (Easy Serving Espresso) coffee pods. For a unique tasting experience, try: SOLO - Single-origin coffee in E.S.E. pods - www.solocaffemonorigine.it
An E.S.E. (Easy Serving Espresso) pod is a pre-packaged ground coffee serving, pressed between two filter paper layers. It has a round shape with standard diameter of 44 mm, and it can be used in coffee machines compatible with the E.S.E. system.
The 1 cup/2 cup filters should be used with ground coffee, to obtain a single cup of coffee/two cups of coffee respectively; while the third filter should be used only with E.S.E. pods, to obtain a single-shot espresso
The quantity of ground coffee required to obtain a single-shot or a double-shot espresso may vary, based on your personal taste, on the grind size, and on the type of coffee used. As reference, you should use 10-12 grams for a single-shot espresso, and 18-20 grams for a double-shot espresso. If you use the E.S.E. pods, the coffee quality will be more consistent.
How much you have to press the ground coffee down depends on the flavour you wish to obtain. Experiment with different pressures based on the coffee amount, grind and type, to obtain the best performance from your coffee machine. As an indication, you should apply a force of 15 kg; however, try out different pressures to obtain the result you are looking for.
Yes, it stops automatically; you can also program the coffee volume, and you can stop dispensing at any time, by pressing the selected button again.
Sure, you can adjust and program the amount of coffee dispensed based on your preference and taste.
No, it is not possible to adjust the coffee temperature with this machine.
Yes, you can use any cup size, as long as its height is lower than 11 cm.
To make the most of Polti Coffea, we recommend using tap water or mineral/natural bottled water. Do not use sparkling or natural effervescent water, or water with added CO2.
For proper maintenance of the machine, carry out the descaling cycle after approx. 400 cups of coffee. Use a liquid descaler for coffee machines according to the instructions and dilutions given by the descaler manufacturer.
For proper maintenance of the machine, carry out the descaling cycle after approx. 400 cups of coffee. The machine will warn you when descaling is needed, by flashing the LEDs repeatedly
No. Use only a liquid descaler for coffee machines according to the instructions and dilutions given by the descaler manufacturer.
Use a specific liquid descaler designed for coffee machines, which can be found in the market.
Hand wash all "removable" components with water and a non-abrasive detergent. Clean the machine body with a wet cloth, and dry it, as needed (Perform this operation with the machine turned OFF and disconnected from the mains).
The water tank should be washed by hand with water and non-abrasive detergents. Always rinse with plenty of clean water